Posts with Tag ‘braided’

Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20

Impreza-Wrx-Sti-Turbo-10-Stainless-Steel-Braided-Hose-Oil-Cooler-Kit-Zqmk-m20-01-zp Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20
Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20
Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20
Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20

Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20
SUBARU IMPREZA 10 ROW OIL COOLER KIT WITH MLR -10 BRAIDED HOSE & FITTINGS. Impreza CG8 (all models) 1992 – 2000. Impreza GD (all models) 2000 – 2007. Impreza GR/GH (all models) 2007 – 2011. This kit is not recommended for low ground clearance vehicles unless steps are taken to avoid oil filter contact with ground – use of a shorter filter or remote filter etc. OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS – PLEASE SEE OUR SHOP ITEMS. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. Size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Additional hose and fittings. Kit is also available with -10 black Nylon. 10 row x 235mm Mocal oil cooler. Mocal oil filter sandwich plate (approx 35mm thick). 2m of MLR -10 Stainless Steel braided high pressure/temperature oil hose. 2x red/blue MLR -10JIC straight unions. 2x red/blue MLR -10JIC 90° unions. 2x -10JIC sandwich plate adaptors. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (FOR TRACK USE) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. Exact cooler size required depends upon: the type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. TURBO SYSTEMS WILL ROCKET THE OIL TEMPERATURE. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “IMPREZA WRX STI TURBO -10 STAINLESS STEEL BRAIDED HOSE OIL COOLER KIT ZQMK-M20″ is in sale since Friday, August 11, 2017. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Cooling\Performance Oil Coolers”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Manufacturer Part Number: ZQMK-M20
  • Brand: MLR

Impreza Wrx Sti Turbo -10 Stainless Steel Braided Hose Oil Cooler Kit Zqmk-m20

Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4

Skyline-Gtr-Gts-t-Mocal-10-Stainless-Steel-Braided-Hose-Oil-Cooler-Kit-Zqk-3-4-01-va Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4
Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4
Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4
Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4

Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4
NISSAN SKYLINE GENUINE MOCAL 13 ROW OIL COOLER KIT WITH -10 BRAIDED HOSE & AEROQUIP FITTINGS. Skyline R32 GTS-T / GTR. Skyline R33 GTS-T / GTR. Skyline R34 GTS-T / GTR. OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS – PLEASE SEE OUR SHOP ITEMS. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. Size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Additional hose and fittings. Kit is also available with Mocal G210-10 black Nylon. 13 Row 235mm oil cooler. Oil filter sandwich plate (approx 35mm thick). 2m of GRH-10 Stainless Steel braided high pressure/temperature oil hose. 2x Red/Blue Aeroquip -10JIC straight unions. 2x Red/Blue Aeroquip -10JIC 90° unions. 2x -10JIC sandwich plate adaptors. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (FOR TRACK USE) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. Exact cooler size required depends upon: the type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. TURBO SYSTEMS WILL ROCKET THE OIL TEMPERATURE. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “SKYLINE GTR GTS-T MOCAL -10 STAINLESS STEEL BRAIDED HOSE OIL COOLER KIT ZQK-3/4″ is in sale since Friday, August 11, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZQK-3/4UNF
  • Brand: Mocal

Skyline Gtr Gts-t Mocal -10 Stainless Steel Braided Hose Oil Cooler Kit Zqk-3/4

PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines

PORSCHE-951-944-Turbo-Stainless-Steel-Braided-Oil-Cooler-Lines-01-rtyi PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines

PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines
PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines. The item “PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines” is in sale since Friday, October 6, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Radiators & Parts”. The seller is “larts_porsche_parts” and is located in California. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply

PORSCHE 951 944 Turbo Stainless Steel Braided Oil Cooler Lines

Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4

Audi-A3-S3-Tt-1-8-20v-Turbo-Stainless-Steel-Braided-Hose-Oil-Cooler-Kit-Zqmk-3-4-01-wrg Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4
Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4
Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4
Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4

Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4
AUDI A3 / S3 / TT 10 ROW OIL COOLER KIT WITH MLR -10 BRAIDED HOSE & FITTINGS. Audi TT (all models with metal spin on oil filter, Not V5/V6). Audi A3/S3 (all models with metal spin on oil filter, Not V5/V6). Not suitable for V5/V6/VR6 engines. OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS – PLEASE SEE OUR SHOP ITEMS. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. 10JIC size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Kit is also available with -10 black Nylon. 10 row x 235mm Mocal oil cooler. Mocal oil filter sandwich plate (approx 35mm thick). 2m of MLR -10 Stainless Steel braided high pressure/temperature oil hose. 2x red/blue MLR -10JIC straight unions. 2x red/blue MLR -10JIC 90° unions. 2x -10JIC sandwich plate adaptors. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (FOR TRACK USE) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. TURBO SYSTEMS WILL ROCKET THE OIL TEMPERATURE. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “AUDI A3 S3 TT 1.8 20V TURBO STAINLESS STEEL BRAIDED HOSE OIL COOLER KIT ZQMK-3/4″ is in sale since Tuesday, November 14, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZQMK-3/4UNF
  • Brand: MLR

Audi A3 S3 Tt 1.8 20v Turbo Stainless Steel Braided Hose Oil Cooler Kit Zqmk-3/4

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Ford-Oil-Cooler-Kit-Sandwich-Braided-Stainless-Steel-Hoses-M20-3-4-16-2m-01-lff Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m
Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m
10 row 235mm oil cooler core. 2 x 90 AN8 fittings. 2 x straight AN8 fittings. 4 x hose clips. 1 x M20 oil filter adaptor. 1 x 3/4 16 oil filter adaptor. 1 x sandwich plate with two take offs for use with oil pressure or oil temperature sensors if required. You may require additional nuts/bolts/brackets depending on where you wish to mount the oil cooler. The hose will be supplied in a single 2 metre length and will need to be cut to your desired sizes. Use either the M20 or 3/4 16 oil filter adaptor to attach to your engine block. We will always go out of our way to source the product you are looking for. Supplier of Renault 5 GT Turbo parts and performance car parts for over 10 years. We deliver within the UK and internationally. Please return items to the address found on your invoice / receipt. Made with love by. The item “FORD OIL COOLER KIT SANDWICH BRAIDED STAINLESS STEEL HOSES M20 3/4 16 2M” is in sale since Saturday, September 24, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “cgbmotorsport” and is located in TELFORD. This item can be shipped worldwide.
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: Does Not Apply
  • Classic Car Part: Yes
  • Brand: Ford

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Universal-Oil-Cooler-Kit-Sandwich-Braided-Stainless-Steel-Hoses-M20-3-4-16-2m-01-abfp Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m
Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m
10 row 235mm oil cooler core. 2 x 90 AN8 fittings. 2 x straight AN8 fittings. 4 x hose clips. 1 x M20 oil filter adaptor. 1 x 3/4 16 oil filter adaptor. 1 x sandwich plate with two take offs for use with oil pressure or oil temperature sensors if required. You may require additional nuts/bolts/brackets depending on where you wish to mount the oil cooler. The hose will be supplied in a single 2 metre length and will need to be cut to your desired sizes. Use either the M20 or 3/4 16 oil filter adaptor to attach to your engine block. We will always go out of our way to source the product you are looking for. Supplier of Renault 5 GT Turbo parts and performance car parts for over 10 years. We deliver within the UK and internationally. Please return items to the address found on your invoice / receipt. Made with love by. The item “UNIVERSAL OIL COOLER KIT SANDWICH BRAIDED STAINLESS STEEL HOSES M20 3/4 16 2M” is in sale since Friday, September 23, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “cgbmotorsport” and is located in TELFORD. This item can be shipped worldwide.
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: Does Not Apply
  • Classic Car Part: Yes
  • Brand: Unbranded

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 2m

Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver

Universal-9Row-Oil-Cooler-Filter-Relocater-Stainless-Steel-Braided-Lines-Silver-01-viw Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver
Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver
Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver

Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver
THIS ITEM IS FOR. Universal – Not A Direct Bolt On Item. 100% Brand New Items, Never Used Or Installed. Universal 9 Row Aluminum Oil Cooler With Oil Filter Relocation Adapter Kit. CNC Machine Made From High Quality Billet Aluminum Materials. Made By OEM Approved & ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements. Can Be Used On Engines, Transmissions, Or Rear Differentials. Plate & Fin Core Design For Very Effective Cooling Of Hot Engine Oil. 1x 60″ & 1x 66″ Stainless Steel Braided Nylon Oil Lines Hoses For Fully Reinforced Strength. Works Well With Turbo Charged / Super Charger / High Performance Engines. Oil Cooler Dimensions: Overall – L: 13.5″ x W: 2″ x H: 7″ ; Core Size : L: 9″ x W: 2″ x H: 5.5″. Oil Filter Relocator Has Two 1/8 NPT Ports For Sensors And Two AN-10 Fittings For Oil Cooler Applications. Inlet / Outlet: 10AN (AN-Fittings). Please Take Correct Measurements Of Item To Confirm It Will Fit In The Location Provided For Your Vehicle. This Will Require Modifications To Mount Properly Onto Car; Additional Fittings / Lines / Relocation Of Components May Be Required. INTERNATIONAL BUYERS – OUR LIGHTS ARE MADE FOR NORTH AMERICAN MODEL CARS. WE ARE NOT SURE IF THEY WILL FIT FIT OTHER MODELS. We highly recommend professional installation for all products. Installation instructions are not included for some products. Please inspect your package upon arrival. Some parts may not be legal for street use. We strive to provide the best customer service possible to our customers. We do not make the products, installation instructions are not included in most cases. Please consult mechanics with experience of aftermarket products. We sell DIY (Do It Yourself) items. Although our products are made to fit OEM specifications, there may be slight issues with gaps on lighting. If the vehicle has had collision damage, the chances of improper fitment increase. Vehicles with poor body frame alignment and or flex will also be more likely to have fitment gaps. We guarantee fitment gap are no more than 1/3 wide on each side. Installation by non-certified professionals is dangerous and could cause item or vehicle damage. Inspect all item upon arrival, if you found the item broken or defective, please notify us within 7 days. No claim will be accepted after 7 days. All returning item will need to obtain authorization from us. You may find your answer through our FAQs before you write to us. We are here to resolve any issue you have. The item “Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver” is in sale since Sunday, July 29, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Oil Coolers”. The seller is “sindriaautoinc” and is located in El Monte, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Brunei darussalam, Bolivia, Ecuador, Egypt, Guadeloupe, Iceland, Jordan, Cayman islands, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay.
  • Installation Guides: No Installation Guides Included
  • Placement on Vehicle: Front
  • Specifics: Additional Items Will Be Require For Your Vehicle
  • Fitment: Universal, NOT A DIRECT BOLT ON
  • Notes: Car Compatibility Chart For Search Purposes Only
  • Interchange Part Number: Universal Engine Transmission Oil Cooler Relocator 9 Row 10AN
  • Manufacturer Part Number: OCK-001CH
  • Other Part Number: Upgrade Replacement Filter Adapter Adaptor Relocation Cooling Kit
  • Brand: Sindria
  • Warranty: Yes

Universal 9Row Oil Cooler +Filter Relocater+Stainless Steel Braided Lines Silver

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Ford-Oil-Cooler-Kit-Sandwich-Braided-Stainless-Steel-Hoses-M20-3-4-16-3m-01-ew Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m
Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m
10 row 235mm oil cooler core. 2 x 90 AN8 fittings. 2 x straight AN8 fittings. 4 x hose clips. 1 x M20 oil filter adaptor. 1 x 3/4 16 oil filter adaptor. 1 x sandwich plate with two take offs for use with oil pressure or oil temperature sensors if required. You may require additional nuts/bolts/brackets depending on where you wish to mount the oil cooler. The hose will be supplied in a single 3 metre length and will need to be cut to your desired sizes. Use either the M20 or 3/4 16 oil filter adaptor to attach to your engine block. We will always go out of our way to source the product you are looking for. Supplier of Renault 5 GT Turbo parts and performance car parts for over 10 years. We deliver within the UK and internationally. Please return items to the address found on your invoice / receipt. Made with love by. The item “FORD OIL COOLER KIT SANDWICH BRAIDED STAINLESS STEEL HOSES M20 3/4 16 3M” is in sale since Saturday, September 24, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “cgbmotorsport” and is located in TELFORD. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Classic Car Part: Yes
  • Brand: Unbranded

Ford Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Universal-Oil-Cooler-Kit-Sandwich-Braided-Stainless-Steel-Hoses-M20-3-4-16-3m-01-bm Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m
Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m
10 row 235mm oil cooler core. 2 x 90 AN8 fittings. 2 x straight AN8 fittings. 4 x hose clips. 1 x M20 oil filter adaptor. 1 x 3/4 16 oil filter adaptor. 1 x sandwich plate with two take offs for use with oil pressure or oil temperature sensors if required. You may require additional nuts/bolts/brackets depending on where you wish to mount the oil cooler. The hose will be supplied in a single 3 metre length and will need to be cut to your desired sizes. Use either the M20 or 3/4 16 oil filter adaptor to attach to your engine block. We will always go out of our way to source the product you are looking for. Supplier of Renault 5 GT Turbo parts and performance car parts for over 10 years. We deliver within the UK and internationally. Please return items to the address found on your invoice / receipt. Made with love by. The item “UNIVERSAL OIL COOLER KIT SANDWICH BRAIDED STAINLESS STEEL HOSES M20 3/4 16 3M” is in sale since Friday, September 23, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “cgbmotorsport” and is located in TELFORD. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Classic Car Part: Yes
  • Brand: Unbranded

Universal Oil Cooler Kit Sandwich Braided Stainless Steel Hoses M20 3/4 16 3m

Renault 5 Gt Turbo New Alloy Oil Cooler Kit Braided Stainless Steel Hoses Blue

Renault-5-Gt-Turbo-New-Alloy-Oil-Cooler-Kit-Braided-Stainless-Steel-Hoses-Blue-01-yuo Renault 5 Gt Turbo New Alloy Oil Cooler Kit Braided Stainless Steel Hoses Blue

Renault 5 Gt Turbo New Alloy Oil Cooler Kit Braided Stainless Steel Hoses Blue
10 row oil cooler core. Installation kit includes braided stainless steel rubber hoses and sandwich plate with mounting bolts to engine block. The sandwich plate has two take offs for use with oil pressure or oil temperature sensors if required. All parts required are included – you may require additional nuts/bolts/brackets depending on where you wish to mount the oil cooler. We will always go out of our way to source the product you are looking for. Supplier of Renault 5 GT Turbo parts and performance car parts for over 10 years. We deliver within the UK and internationally. Please return items to the address found on your invoice / receipt. Made with love by. The item “RENAULT 5 GT TURBO NEW ALLOY OIL COOLER KIT BRAIDED STAINLESS STEEL HOSES BLUE” is in sale since Tuesday, August 14, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “cgbmotorsport” and is located in TELFORD. This item can be shipped to all countries in Europe.
  • Modified Item: Yes
  • Custom Bundle: No
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: Does Not Apply
  • Classic Car Part: Yes
  • Brand: Renault
  • Colour: Blue

Renault 5 Gt Turbo New Alloy Oil Cooler Kit Braided Stainless Steel Hoses Blue